From: ccieuk (ccie2001uk@xxxxxxxxx)
Date: Tue Feb 06 2001 - 16:26:44 GMT-3
I'm trying to set GTS on a token ring interface to
restrict FTP to only 2 Mbps
I found an example on the CD, but don't really
understand the explanation. See below
Enable GTS on the Interface Example
This example shows the configuration of two
traffic-shaped interfaces on a router. Ethernet 0 is
configured to limit User Datagram Protocol (UDP)
traffic to 1 Mbps. Ethernet 1 is configured to limit
all output to 5 Mbps.
access-list 101 permit udp any any
interface Ethernet0
traffic-shape group 101 1000000 125000 125000
!
interface Ethernet1
traffic-shape rate 5000000 625000 625000
I don't understand where the 125000 figure comes from?
Any help would be appreciated
Thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:39 GMT-3