From: George Zhang (GeorgeZhang@xxxxxxxxxxxxxxxxxx)
Date: Wed Jan 31 2001 - 14:37:14 GMT-3
Try the following. It was from Cisco Doc.
Example
The following example configures the internal cross-connect PVC on Switch B bet
ween interface 3/0/1, VPI=0, VCI =50 and interface 3/0/2, VPI=2, VCI=100 (see F
igure 6-1):
Switch-B(config)#interface atm 3/0/1
Switch-B(config-if)#atm pvc 0 50 interface atm 3/0/2 2 100
The following example configures the internal cross-connect PVC on Switch-C bet
ween interface 4/1/0, VPI=2, VCI =100 and interface 0/0/1, VPI 50, VCI=255:
Switch-C(config)#interface atm 4/1/0
Switch-C(config-if)#atm pvc 2 100 interface atm 0/0/1 50 255
>>> Vikas Gupta <vicky_gupta1803@yahoo.com> 01/31/01 11:21AM >>>
Hi Group,
Can somebody post the sample config of building PVCs
on LS1010 like you would do on a frame switch.
Thanks!
Vikas
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:50 GMT-3