From: Ali, Shahzad (Shahzad.Ali@xxxxxx)
Date: Wed Jan 31 2001 - 16:21:00 GMT-3
Here are the working Configs
R1--------LS1010-------R2
!
r1
!
!
interface ATM1/0
ip address 10.1.1.7 255.255.255.0
no ip directed-broadcast
map-group atm
atm pvc 78 1 78 aal5snap
no atm ilmi-keepalive
!
!
map-list atm
ip 10.1.1.8 atm-vc 78 broadcast
!
!
LS1010
!
!
interface ATM4/1/0
atm maxvp-number 16
!
interface ATM4/1/1
atm maxvp-number 16
atm pvc 1 78 interface ATM4/1/0 1 78
!
r2
!
!
interface ATM1/0
ip address 10.1.1.8 255.255.255.0
no ip directed-broadcast
map-group atm
atm pvc 78 1 78 aal5snap
no atm ilmi-keepalive
! !
map-list atm
ip 10.1.1.7 atm-vc 78 broadcast
!
r2#ping 10.1.1.7
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.7, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
Regards,
ShahzaD
-----Original Message-----
From: Vikas Gupta [mailto:vicky_gupta1803@yahoo.com]
Sent: Wednesday, January 31, 2001 11:22 AM
To: ccielab@groupstudy.com
Subject: building PVCs on LS1010
Hi Group,
Can somebody post the sample config of building PVCs
on LS1010 like you would do on a frame switch.
Thanks!
Vikas
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:50 GMT-3