From: Casassa, Nathan (ncasassa@xxxxxxxxxxx)
Date: Wed Jan 31 2001 - 16:32:00 GMT-3
Even better - go to www.firewallking.com and sign up for a free tacacs
login. You can have full enable privs to config many routers and an LS1010,
however the LS1010 is not connected to anything else at this time, but you
can still practice building PVCs but they just won't be up.
Nathan
-----Original Message-----
From: Ali, Shahzad [mailto:Shahzad.Ali@ps.net]
Sent: Wednesday, January 31, 2001 2:21 PM
To: Vikas Gupta; ccielab@groupstudy.com
Subject: RE: building PVCs on LS1010
Here are the working Configs
R1--------LS1010-------R2
!
r1
!
!
interface ATM1/0
ip address 10.1.1.7 255.255.255.0
no ip directed-broadcast
map-group atm
atm pvc 78 1 78 aal5snap
no atm ilmi-keepalive
!
!
map-list atm
ip 10.1.1.8 atm-vc 78 broadcast
!
!
LS1010
!
!
interface ATM4/1/0
atm maxvp-number 16
!
interface ATM4/1/1
atm maxvp-number 16
atm pvc 1 78 interface ATM4/1/0 1 78
!
r2
!
!
interface ATM1/0
ip address 10.1.1.8 255.255.255.0
no ip directed-broadcast
map-group atm
atm pvc 78 1 78 aal5snap
no atm ilmi-keepalive
! !
map-list atm
ip 10.1.1.7 atm-vc 78 broadcast
!
r2#ping 10.1.1.7
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.7, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
Regards,
ShahzaD
-----Original Message-----
From: Vikas Gupta [mailto:vicky_gupta1803@yahoo.com]
Sent: Wednesday, January 31, 2001 11:22 AM
To: ccielab@groupstudy.com
Subject: building PVCs on LS1010
Hi Group,
Can somebody post the sample config of building PVCs
on LS1010 like you would do on a frame switch.
Thanks!
Vikas
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:50 GMT-3