From: Venkatesh (rvenkatesh@xxxxxxxxxxx)
Date: Wed Jan 31 2001 - 13:40:00 GMT-3
Hi ,
I think the problem is that u have missed out configuring the username &
password on both routers.The username should be the one of the router at the
remote end,while the password remains the same on both the routers.Try this
it should work.
VenkateshRavindran CCNP,CCDA
Network Engineer - Iloka Inc
----- Original Message -----
From: Bolcer, Matt <matt.bolcer@eds.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, January 31, 2001 10:22 AM
Subject: basic isdn setup problem
> anyone see any reasons for the encap failures when the dialer map shows
the
> path and the isdn info is okay (supposedly)?
>
> R2----------------- Teltone ISDN Simulator ----------------- R3
>
> R2 config:
>
> !
> interface BRI0
> ip address 196.1.1.26 255.255.255.0
> ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> dialer idle-timeout 90
> dialer map ip 196.1.1.29 name r3 8358664
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 0835866101
> isdn spid2 0835866301
> ppp authentication chap
> !
> ip classless
> no ip http server
> !
> dialer-list 1 protocol ip permit
>
>
> r2#sh isdn status
> Global ISDN Switchtype = basic-dms100
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-dms100
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 96, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> TEI = 97, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> Spid Status:
> TEI 96, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 1, tid = 1
> TEI 97, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent, spid2 valid
> Endpoint ID Info: epsf = 0, usid = 3, tid = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
>
> r3 config:
> !
> interface BRI0
> ip address 196.1.1.29 255.255.255.0
> ip directed-broadcast
> encapsulation ppp
> no ip route-cache
> logging event subif-link-status
> dialer idle-timeout 90
> dialer map ip 196.1.1.26 name r2 8358661
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 0835866201
> isdn spid2 0835866401
> no fair-queue
> ppp authentication chap
> !
> ip classless
> ip route 164.56.2.132 255.255.255.252 192.168.4.1
> no ip http server
> !
> access-list 99 permit 192.57.1.1
> access-list 100 permit ip any any
> dialer-list 1 protocol ip permit
>
> r3#sh isdn status
> Global ISDN Switchtype = basic-dms100
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-dms100
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 94, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> TEI = 95, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> I_Queue_Len 0, UI_Queue_Len 0
> Spid Status:
> TEI 94, ces = 1, state = 5(init)
> spid1 configured, no LDN, spid1 sent, spid1 valid
> Endpoint ID Info: epsf = 0, usid = 2, tid = 1
> TEI 95, ces = 2, state = 5(init)
> spid2 configured, no LDN, spid2 sent, spid2 valid
> Endpoint ID Info: epsf = 0, usid = 4, tid = 1
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 0
> The Free Channel Mask: 0x80000003
> Total Allocated ISDN CCBs = 0
>
> r2#sh dialer map
> Static dialer map ip 196.1.1.29 name r3 (8358662) on BRI0
>
> r3#sh dialer map
> Static dialer map ip 196.1.1.26 name r2 (8358661) on BRI0
>
> r2#sh debug
> Dial on demand:
> Dial on demand events debugging is on
> Generic IP:
> IP packet debugging is on
> PPP:
> PPP packet display debugging is on
> ISDN:
> ISDN events debugging is on
> ISDN Q931 packets debugging is on
>
> ISDN events debug DSLs. (On/Off/No DSL:1/0/-)
> DSL 0 --> 1
> 1 -
>
> ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-)
> DSL 0 --> 1
> 1 -
>
> r2# ping 196.1.1.29
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 196.1.1.29, timeout is 2 seconds:
>
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
> 1d18h: BRI0 DDR: Dialing cause ip (s=196.1.1.26, d=196.1.1.29)
> 1d18h: BRI0 DDR: Attempting to dial 8358662
> 1d18h: ISDN BR0: Outgoing call id = 0x800A, dsl 0
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100,
encapsulation
> fai
> led
> 1d18h: ISDN BR0: Event: Call to 8358662 at 64 Kb/s
> 1d18h: ISDN BR0: process_bri_call(): call id 0x800A, called_number
8358662,
> spee
> d 64, call type DATA
> 1d18h: CC_CHAN_GetIdleChanbri: dsl 0
> 1d18h: Found idle channel B1
> 1d18h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x0A
> 1d18h: Bearer Capability i = 0x8890
> 1d18h: Channel ID i = 0x83
> 1d18h: Called Party Number i = 0x80, '8358662'
> 1d18h: Sending Complete
> 1d18h: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x8A
> 1d18h: Channel ID i = 0x89
> 1d18h: Locking Shift to Codeset 5
> 1d18h: Codeset 5 IE 0x2A i = 0x809402, '`=', 0x8307, '8358662',
> 0x8E0B2
> 0, 'TELTONE', 0x20, '2', 0x20
> 1d18h.: ISDN BR0: received HOST_PROCEEDING call_id 0x800A
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100,
encapsulation
> fai
> led.
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100,
encapsulation
> fai
> led.
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100,
encapsulation
> fai
> led.
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
> 1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100,
encapsulation
> fai
> led.
> Success rate is 0 percent (0/5)
> r2#
> 1d18h: BRI0: wait for isdn carrier timeout, call id=0x800A
> 1d18h: ISDN BR0: Event: Hangup call to call id 0x800A ces = 1
> 1d18h: ISDN BR0: process_disconnect(): call id 0x800A, call type is DATA,
> b_idb
> 0x2617CEC, ces 1
> 1d18h: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x0A
> 1d18h: Cause i = 0x8090 - Normal call clearing
> 1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x8A
> 1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x0A
> 1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x800A
> 1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
>
>
> r3 debug...
>
> 1d18h: ISDN BR0: RX <- SETUP pd = 8 callref = 0x34
> 1d18h: Bearer Capability i = 0x8890
> 1d18h: Channel ID i = 0x89
> 1d18h: Signal i = 0x40 - Alerting on - pattern 0
> 1d18h: ENDPOINT IDent i = 0x8281
> 1d18h: Calling Party Number i = 'A', 0x81, '8358661'
> 1d18h: Called Party Number i = 0xC1, '8358662'
> 1d18h: ISDN BR0: Incoming call id = 0x10, dsl 0
> 1d18h: ISDN BR0: received HOST_INCOMING_CALL call_id 0x10
> 1d18h: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = FALSE
> 1d18h: ISDN BR0: Event: Received a DATA call from 8358661 on B1 at 64 Kb/s
> 1d18h: ISDN BR0: RM returned call_type 0 resource type 0
> 1d18h: ISDN BR0: TX -> CALL_PROC pd = 8 callref = 0xB4
> 1d18h: Channel ID i = 0x89
> 1d18h: ISDN BR0: isdn_send_connect(): msg 4, call id 0x10, ces 1 bchan 0,
> call t
> ype DATA
> 1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
> 1d18h: ISDN BR0: received HOST_QUERY_RESPONSE call_id 0x10
> 1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
> 1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x34
> 1d18h: Cause i = 0x8290 - Normal call clearing
> 1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0xB4
> 1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x10
> 1d18h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 ,
> call la
> sted 30 seconds
> 1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
> 1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3