From: Christopher Larson (clarson@xxxxxxxxxxx)
Date: Wed Jan 31 2001 - 13:42:20 GMT-3
I have tried running ISDN w/o authentication and it has never worked. Is
there a way to do this? I assumed since when you map your IP to an LDN and
included the name argument that you would have to use authentication. How
else would that name be passed? PPP isn't going to pass names (w/o authent)
nor is TCP, so .............. Is there a way to do this?
-----Original Message-----
From: Alan Basinger [mailto:abasinge@swbell.net]
Sent: Wednesday, January 31, 2001 10:29 AM
To: Bolcer, Matt; ccielab@groupstudy.com
Subject: RE: basic isdn setup problem
I noticed your using chap authentication, have you tried removing the chap
authentication then sending? Also you could try debugging your
authentication "debug ppp auth" and seeing if you are indeed getting
authenticated.
HTH
Alan Basinger
Systems Engineer
SBC DataComm
Houston Texas
abasinge@swbell.net
| |
||| |||
.|||||. .|||||.
.:|||||||||:.:|||||||||:.
C i s c o S y s t e m s
Certified Gold Partner
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bolcer, Matt
Sent: Wednesday, January 31, 2001 9:22 AM
To: ccielab@groupstudy.com
Subject: basic isdn setup problem
anyone see any reasons for the encap failures when the dialer map shows the
path and the isdn info is okay (supposedly)?
R2----------------- Teltone ISDN Simulator ----------------- R3
R2 config:
!
interface BRI0
ip address 196.1.1.26 255.255.255.0
ip directed-broadcast
encapsulation ppp
no ip route-cache
dialer idle-timeout 90
dialer map ip 196.1.1.29 name r3 8358664
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 0835866101
isdn spid2 0835866301
ppp authentication chap
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
r2#sh isdn status
Global ISDN Switchtype = basic-dms100
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 96, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
TEI = 97, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
Spid Status:
TEI 96, ces = 1, state = 5(init)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 1, tid = 1
TEI 97, ces = 2, state = 5(init)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 3, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
r3 config:
!
interface BRI0
ip address 196.1.1.29 255.255.255.0
ip directed-broadcast
encapsulation ppp
no ip route-cache
logging event subif-link-status
dialer idle-timeout 90
dialer map ip 196.1.1.26 name r2 8358661
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 0835866201
isdn spid2 0835866401
no fair-queue
ppp authentication chap
!
ip classless
ip route 164.56.2.132 255.255.255.252 192.168.4.1
no ip http server
!
access-list 99 permit 192.57.1.1
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
r3#sh isdn status
Global ISDN Switchtype = basic-dms100
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-dms100
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 94, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
TEI = 95, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
Spid Status:
TEI 94, ces = 1, state = 5(init)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 2, tid = 1
TEI 95, ces = 2, state = 5(init)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 4, tid = 1
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
r2#sh dialer map
Static dialer map ip 196.1.1.29 name r3 (8358662) on BRI0
r3#sh dialer map
Static dialer map ip 196.1.1.26 name r2 (8358661) on BRI0
r2#sh debug
Dial on demand:
Dial on demand events debugging is on
Generic IP:
IP packet debugging is on
PPP:
PPP packet display debugging is on
ISDN:
ISDN events debugging is on
ISDN Q931 packets debugging is on
ISDN events debug DSLs. (On/Off/No DSL:1/0/-)
DSL 0 --> 1
1 -
ISDN Q931 packets debug DSLs. (On/Off/No DSL:1/0/-)
DSL 0 --> 1
1 -
r2# ping 196.1.1.29
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 196.1.1.29, timeout is 2 seconds:
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: BRI0 DDR: Dialing cause ip (s=196.1.1.26, d=196.1.1.29)
1d18h: BRI0 DDR: Attempting to dial 8358662
1d18h: ISDN BR0: Outgoing call id = 0x800A, dsl 0
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led
1d18h: ISDN BR0: Event: Call to 8358662 at 64 Kb/s
1d18h: ISDN BR0: process_bri_call(): call id 0x800A, called_number 8358662,
spee
d 64, call type DATA
1d18h: CC_CHAN_GetIdleChanbri: dsl 0
1d18h: Found idle channel B1
1d18h: ISDN BR0: TX -> SETUP pd = 8 callref = 0x0A
1d18h: Bearer Capability i = 0x8890
1d18h: Channel ID i = 0x83
1d18h: Called Party Number i = 0x80, '8358662'
1d18h: Sending Complete
1d18h: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x8A
1d18h: Channel ID i = 0x89
1d18h: Locking Shift to Codeset 5
1d18h: Codeset 5 IE 0x2A i = 0x809402, '`=', 0x8307, '8358662',
0x8E0B2
0, 'TELTONE', 0x20, '2', 0x20
1d18h.: ISDN BR0: received HOST_PROCEEDING call_id 0x800A
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, sending
1d18h: IP: s=196.1.1.26 (local), d=196.1.1.29 (BRI0), len 100, encapsulation
fai
led.
Success rate is 0 percent (0/5)
r2#
1d18h: BRI0: wait for isdn carrier timeout, call id=0x800A
1d18h: ISDN BR0: Event: Hangup call to call id 0x800A ces = 1
1d18h: ISDN BR0: process_disconnect(): call id 0x800A, call type is DATA,
b_idb
0x2617CEC, ces 1
1d18h: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x0A
1d18h: Cause i = 0x8090 - Normal call clearing
1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x8A
1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x0A
1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x800A
1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
r3 debug...
1d18h: ISDN BR0: RX <- SETUP pd = 8 callref = 0x34
1d18h: Bearer Capability i = 0x8890
1d18h: Channel ID i = 0x89
1d18h: Signal i = 0x40 - Alerting on - pattern 0
1d18h: ENDPOINT IDent i = 0x8281
1d18h: Calling Party Number i = 'A', 0x81, '8358661'
1d18h: Called Party Number i = 0xC1, '8358662'
1d18h: ISDN BR0: Incoming call id = 0x10, dsl 0
1d18h: ISDN BR0: received HOST_INCOMING_CALL call_id 0x10
1d18h: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data = FALSE
1d18h: ISDN BR0: Event: Received a DATA call from 8358661 on B1 at 64 Kb/s
1d18h: ISDN BR0: RM returned call_type 0 resource type 0
1d18h: ISDN BR0: TX -> CALL_PROC pd = 8 callref = 0xB4
1d18h: Channel ID i = 0x89
1d18h: ISDN BR0: isdn_send_connect(): msg 4, call id 0x10, ces 1 bchan 0,
call t
ype DATA
1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
1d18h: ISDN BR0: received HOST_QUERY_RESPONSE call_id 0x10
1d18h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
1d18h: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x34
1d18h: Cause i = 0x8290 - Normal call clearing
1d18h: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0xB4
1d18h: ISDN BR0: received HOST_DISCONNECT_ACK call_id 0x10
1d18h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 ,
call la
sted 30 seconds
1d18h: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
1d18h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:49 GMT-3