From: Mask Of Zorro (ciscokid00@xxxxxxxxxxx)
Date: Wed Jan 24 2001 - 13:21:44 GMT-3
Always troublshoot Frame Relay from BOTH SIDES...
Z
>From: "Chuck Larrieu" <chuck@cl.cncdsl.com>
>Reply-To: "Chuck Larrieu" <chuck@cl.cncdsl.com>
>To: "Ifeanyi Eze" <ieze@callisma.com>, <ccielab@groupstudy.com>
>Subject: RE: Problem configuring a hub and spoke frame switch in 2520
>series
>Date: Wed, 24 Jan 2001 07:49:00 -0800
>
>What do your debug frame lmi, debug frame packet and debug frame event
>outputs tell you?
>
>The configurations from the router in question would help, also.
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Ifeanyi Eze
>Sent: Tuesday, January 23, 2001 7:34 AM
>To: ccielab@groupstudy.com
>Subject: Problem configuring a hub and spoke frame switch in 2520 series
>
>Help please
>
>
>
>Below is the config for the frame switch
>interface serial 0
>no ip address
>encapsulation frame-relay
>frame-relay intf-type dce
>clockrate 64000
>keepalive 15
>frame-relay route 100 interface serial 2 201
>!
>interface serial 1
>no ip address
>encapsulation frame-relay
>frame-relay intf-type dce
>clockrate 64000
>keepalive 15
>frame-relay route 101 interface serial 2 102
>!
>interface serial 2
>encapsulation frame-relay
>frame-relay intf-type dce
>clockrate 64000
>keepalive 15
>frame-relay route 201 interface serial 0 100
>frame-relay route 102 interface serial 1 101
>
>Spicey and Aton works fine through inverse-arp. Prasit s1 maintains up/up
>status but with frame-relay dte, lmi, and pvc down. I have swapped cables,
>interfaces and router to no avail. When I add keepalive 15 on Prasit s1,
>it
>goes down.
>Any help will be appreciated.
>
>Eze
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:42 GMT-3