From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Sun Jan 21 2001 - 22:16:55 GMT-3
Bernard, your LS1010 doesn't have the exit interface to route the PVC
through to and the VPI/VCI addressing to attach....
Also, on the LS1010 you only need to configure one side of the PVC, the
reverse is then configured automatically....
e.g.
interface ATM11/1/2
no keepalive
no shutdown
atm pvc 0 32 int atm11/1/3 0 32
interface ATM11/1/3
no keepalive
no shutdown
Regards,
Justin Menga CCIE #6640 MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
-----Original Message-----
From: Bernard Omrani [mailto:one@dollarpower.com]
Sent: Monday, 22 January 2001 2:00 p.m.
To: 'ccielab@groupstudy.com'
Subject: ATM interfaces can't ping
Attention ATM gurus:
Two ATM routers on either side of a LS1010 can not ping each other.
All interfaces show up.
This might be a clue: show atm vc
on one router shows status up
on the other shows status active.
Any help greatly appreciated.
Bernard
Router 1
!
interface ATM2/0
ip address 172.16.68.1 255.255.255.0
map-group bernard
atm pvc 1 0 32 aal5nlpid
map-list bernard
ip 172.16.68.2 atm-vc 1 broadcast
ATM2/0 172.16.68.1 YES manual up up
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Router 2
!
interface ATM1/0
ip address 172.16.68.2 255.255.255.0
no ip directed-broadcast
map-group bernard
atm vc-per-vp 4096
atm pvc 1 0 32 aal5nlpid
no atm ilmi-keepalive
!
!
map-list bernard
ip 172.16.68.1 atm-vc 1 broadcast
ATM1/0 172.16.68.2 YES manual up up
+++++++++++++++++++++++++++++++++++++++++++++++++++++
ls1010#show ip interface brief
Interface IP-Address OK? Method Status Protocol
ATM11/0/0 unassigned YES unset down down
ATM11/1/0 unassigned YES unset down down
ATM11/1/1 unassigned YES unset down down
ATM11/1/2 unassigned YES unset up up
ATM11/1/3 unassigned YES unset up up
ATM12/0/0 unassigned YES unset down down
ATM12/0/1 unassigned YES unset down down
ATM12/0/2 unassigned YES unset down down
ATM12/1/3 unassigned YES unset down down
ls1010
Show config
!
interface ATM11/1/2
no keepalive
atm pvc 0 32
!
interface ATM11/1/3
no keepalive
atm pvc 0 32
!
++++++++++++++++++++++++++++++++++
r2621#sh atm vc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells
Sts
1/0 1 0 32 PVC NLPID UBR 25000
UP
r2621#
r2511#1
[Resuming connection 1 to r1 ... ]
r1#sh atm vc
AAL / Peak Avg. Burst
Interface VCD VPI VCI Type Encapsulation Kbps Kbps Cells Status
ATM2/0 1 0 32 PVC AAL5-NLPID 155000 155000 96 ACTIVE
r1#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:38 GMT-3