ATM interfaces can't ping

From: Bernard Omrani (one@xxxxxxxxxxxxxxx)
Date: Sun Jan 21 2001 - 22:00:18 GMT-3


   
Attention ATM gurus:
Two ATM routers on either side of a LS1010 can not ping each other.
All interfaces show up.

This might be a clue: show atm vc
on one router shows status up
on the other shows status active.

Any help greatly appreciated.

Bernard

Router 1
!
interface ATM2/0
 ip address 172.16.68.1 255.255.255.0
 map-group bernard
 atm pvc 1 0 32 aal5nlpid

map-list bernard
 ip 172.16.68.2 atm-vc 1 broadcast

ATM2/0 172.16.68.1 YES manual up up

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Router 2

!
interface ATM1/0
 ip address 172.16.68.2 255.255.255.0
 no ip directed-broadcast
 map-group bernard
 atm vc-per-vp 4096
 atm pvc 1 0 32 aal5nlpid
 no atm ilmi-keepalive

!
!
map-list bernard
 ip 172.16.68.1 atm-vc 1 broadcast

ATM1/0 172.16.68.2 YES manual up up

+++++++++++++++++++++++++++++++++++++++++++++++++++++

ls1010#show ip interface brief
Interface IP-Address OK? Method Status Protocol
ATM11/0/0 unassigned YES unset down down
ATM11/1/0 unassigned YES unset down down
ATM11/1/1 unassigned YES unset down down
ATM11/1/2 unassigned YES unset up up
ATM11/1/3 unassigned YES unset up up
ATM12/0/0 unassigned YES unset down down
ATM12/0/1 unassigned YES unset down down
ATM12/0/2 unassigned YES unset down down
ATM12/1/3 unassigned YES unset down down

ls1010

Show config
!
interface ATM11/1/2
 no keepalive
 atm pvc 0 32
!
interface ATM11/1/3
 no keepalive
 atm pvc 0 32
!

++++++++++++++++++++++++++++++++++

r2621#sh atm vc
            VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells
Sts
1/0 1 0 32 PVC NLPID UBR 25000
UP
r2621#
r2511#1
[Resuming connection 1 to r1 ... ]

r1#sh atm vc
                                     AAL / Peak Avg. Burst
Interface VCD VPI VCI Type Encapsulation Kbps Kbps Cells Status
ATM2/0 1 0 32 PVC AAL5-NLPID 155000 155000 96 ACTIVE
r1#



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:27:38 GMT-3