From: John Bays (baysjohn@xxxxxxx)
Date: Sat Dec 30 2000 - 12:06:09 GMT-3
Sho ver follows
r3#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-DS-L), Version 11.3(11a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Mon 20-Sep-99 07:43 by jjgreen
Image text-base: 0x03040474, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFTWARE (fc1)
r3 uptime is 9 hours, 6 minutes
System restarted by power-on
System image file is "flash:c2500-ds-l.113-11a.bin", booted via flash
cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 13607297, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2142 (will be 0x2102 at next reload)
r3#
At 12:25 AM 12/30/2000 -0800, Jay Hennigan wrote:
>On Sat, 30 Dec 2000, John Bays wrote:
>
> > All,
> >
> > Something strange happened to me today while playing with ospf
> > demand-circuits... When I reload, my router blows up and I have to break in
> > o/r and the copy start run and no shut the interfaces (then it works fine
> > until I reload)...
>
>What's your config-register setting? should be the last line of "sho ver".
>
>--
>Jay Hennigan - Network Administration - jay@west.net
>NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
>WestNet: Connecting you to the planet. 805 884-6323
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:13 GMT-3