From: Dean Bennett (Dean@xxxxxxxxxxxxxxx)
Date: Sat Dec 30 2000 - 12:51:42 GMT-3
Mickle,
I had this problem with my ls100 and TAC sent me this. It worked great for
me:
The default password on all new LS100s is "c"
>From any mode of console, non-priv works fine
1. Enter manager mode just > manager
2. You will be prompted for password
MU.PT?4U`%4_QYJS
3. Depending on software version, you will get "new" prompt, like %
4. just say "flush_passwd" (again this depends on Version)
.... Dean
----- Original Message -----
From: <micklegao@netease.com>
To: "Earl Aboytes" <Earl@dnssystems.com>; "'ccie'" <fschping@yeah.net>;
<ccielab@groupstudy.com>
Sent: Saturday, December 30, 2000 1:47 AM
Subject: Re: how to recovery lightstream100 password
Hi,
first thank you for your help,I research that ducoment,
but still can not find the solution to recovery password
of the ls100 ATM switch.
the cd document mentions to enter lowercase c when you
are indicated to enter the input password.but it is not useful,it is still
at user mode,not entering privilege mode.what's wrong?
----- Original Message -----
From: Earl Aboytes <Earl@dnssystems.com>
To: 'ccie' <fschping@yeah.net>; <ccielab@groupstudy.com>
Sent: Saturday, December 30, 2000 4:38 AM
Subject: RE: how to recovery lightstream100 password
> I am sure that you have looked at this document but it is the best answer
> that I have
>
> http://www.cisco.com/warp/public/474/index.shtml
>
> Earl Aboytes, CCIE 6097
>
> -----Original Message-----
> From: ccie [mailto:fschping@yeah.net]
> Sent: Friday, December 29, 2000 5:46 AM
> To: ccielab@groupstudy.com
> Subject: how to recovery lightstream100 password
>
>
aGksDQogIEkgaGF2ZSBhIGF0bSBsaWdodHN0cmVhbTEwMCBzd2l0Y2gsYnV0IEkgZG8gbm90IGtu
>
b3cgaG93IHRvDQpyZWNvdmVyeSB0aGUgZW5hYmxlIHBhc3N3b3JkLlBsZWFzZSBoZWxwIG1lIGlm
> IHNvbWUgcGVvcGxlDQprbm93IHRoYXQuDQp0aGFua3MgYSBsb3QhDQo=
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:13 GMT-3