From: Connary, Julie Ann (jconnary@xxxxxxxxx)
Date: Wed Dec 20 2000 - 11:21:55 GMT-3
OOps,
I meant when I ping 170.100.68.1 I get the encapsulation failed. I miss
typed below. 170.100.68.2 is the local address.
At 01:48 PM 12/19/2000 -0800, jpritcha@csc.com wrote:
>Julie Ann,
>
>With legacy DDR the IP address in the 'dialer map' statement is the IP
>address of the remote router. With dialer profiles, the IP address
>assigned to the Dialer 0 interface is a local IP address. If 170.100.68.2
>is the remote IP address, you need some other address assigned to your
>local Dialer 0 interface (170.100.68.1 perhaps?).
>
>If that doesn't work, I would try using different dwarf names. I know all
>of us CCIE wannabe's tend to be grumpy and sleepy but try Happy and Doc.
>Good karma.
>
>Jim
>
>
>
>Please respond to "Connary, Julie Ann" <jconnary@cisco.com>
>
>Sent by: nobody@groupstudy.com
>
>
>To: ccielab@groupstudy.com
>cc:
>
>Subject: dialer-profiles and ospf demand-circuit
>
>
>Hi All,
>
>I think I must be missing something really simple. I wanted to try and
>setup dialer-profiles for
>IP and use ospf demand-circuit. But how do I map the ip address to the
>dialer. For example -
>under regular legacy ddr:
>
>dialer map ip 170.100.68.2 name sleepy broadcast 1001
>
>Here is my dialer profile setup. When I do a debug ip packet for a ping to
>170.100.68.2 I get encapsulation
>failed.
>
>interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
>!
>interface Dialer0
> ip address 170.100.68.2 255.255.255.240
> encapsulation ppp
> ip ospf demand-circuit
> dialer remote-name grumpyip
> dialer string 1001
> dialer pool 1
> dialer-group 1
> ppp authentication chap
>ppp chap hostname sleepyip
>!
>router ospf 1
> network 170.100.65.0 0.0.0.255 area 0
> network 170.100.67.0 0.0.0.255 area 3
> network 170.100.68.0 0.0.0.255 area 0
> network 170.100.69.0 0.0.0.255 area 2
> area 0 range 170.100.65.0 255.255.255.0
> area 2 virtual-link 170.100.66.1
>
>dialer-list 1 protocol ip permit
>
>
>
>Thanks in advance,
>
>Julie Ann
>------------------------------------------------------------------------
> Julie Ann Connary
> | | Network Consulting Engineer
> ||| ||| Federal Support Program
> .|||||. .|||||. 13635 Dulles Technology Drive,
>Herndon VA 20171
> .:|||||||||:.:|||||||||:. Pager: 1-888-642-0551
> c i s c o S y s t e m s Email: jconnary@cisco.com
>------------------------------------------------------------------------
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:08 GMT-3