RE: ATM Pvc

From: Connary, Julie Ann (jconnary@xxxxxxxxx)
Date: Wed Dec 20 2000 - 11:47:35 GMT-3

• Next message: jpritcha@xxxxxxx: "Re: dialer-profiles and ospf demand-circuit"
• Previous message: Connary, Julie Ann: "Re: dialer-profiles and ospf demand-circuit"
• Maybe in reply to: Steve Clubb: "ATM Pvc"
• Next in thread: Yurchenko, Michael: "RE: ATM Pvc"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
That depends on how you want the local router to get
his nsap prefix.

Julie Ann

At 09:12 PM 12/19/2000 -0800, ShahzaD Ali wrote:
>and I think you dont need
>
>atm pvc 2 0 16 ilmi on both the routers.
>
>Regards,
>
>ShahzaD
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Yurchenko, Michael
>Sent: Tuesday, December 19, 2000 11:37 AM
>To: 'Steve Clubb'; 'ccielab@groupstudy.com'
>Subject: RE: ATM Pvc
>
>
>Map-group on r7
>
>-----Original Message-----
>From: Steve Clubb [mailto:sclubb@cattech.com]
>Sent: Tuesday, December 19, 2000 2:30 PM
>To: 'ccielab@groupstudy.com'
>Subject: ATM Pvc
>
>
>I can't seem to get connectivity. Can anyone see why?
>
>
>r8 - - - - - - LS1010 - - - - - - - -r7
>
>
>r8
>interface ATM1/0
> ip address 20.20.20.1 255.255.255.0
> no ip directed-broadcast
> map-group cisco
> atm pvc 1 5 45 aal5snap
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
>!
>map-list cisco
> ip 20.20.20.2 atm-vc 1 broadcast
>
>
>LS1010
>interface ATM0/0/0
> no ip address
> no ip directed-broadcast
> no atm ilmi-keepalive
>!
>interface ATM0/0/1
> no ip address
> no ip directed-broadcast
> no atm ilmi-keepalive
> atm pvc 5 45 interface ATM0/0/0 5 45
>
>r7
>interface ATM1/0
> ip address 20.20.20.2 255.255.255.0
> no ip directed-broadcast
> atm pvc 1 5 45 aal5snap
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
>!
>ip classless
>no ip http server
>!
>!
>map-list cisco
> ip 20.20.20.1 atm-vc 1 broadcast
>
>
>debug atm ilmi
>
>3d07h: ILMI(ATM1/0):Sending out Request 1359
>3d07h: ILMI(ATM1/0):Sending out Request 1360
>3d07h: ILMI(ATM1/0):Retrying Request 1359
>3d07h: ILMI(ATM1/0):Sending out Request 1359
>3d07h: ILMI(TM1/0):Retrying Request 1360
>3d07h: ILMI(ATM1/0):Sending out Request 1360
>3d07h: ILMI(ATM1/0):Retrying Request 1359
>3d07h: ILMI(ATM1/0):Sending out Request 1359
>3d07h: ILMI(ATM1/0):Retrying Request 1360
>3d07h: ILMI(ATM1/0):Sending out Request 1360
>3d07h: ILMI(ATM1/0):Retry expired for Request 1359
>
>Thanks,
>
>
>
>
>
>Steven Clubb
>Network Engineer
> <http://www.cattech.com/>
>Phone:
>408.341.1722
>Cell:
>408.568.8854
>FAX:
>408.341.1720
>
>sclubb@cattech.com <mailto:sclubb@cattech.com>
>
>
>
>
>
>
>
>
>

• Next message: jpritcha@xxxxxxx: "Re: dialer-profiles and ospf demand-circuit"
• Previous message: Connary, Julie Ann: "Re: dialer-profiles and ospf demand-circuit"
• Maybe in reply to: Steve Clubb: "ATM Pvc"
• Next in thread: Yurchenko, Michael: "RE: ATM Pvc"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:08 GMT-3