From: G F Marsh (gfm@xxxxxxxxx)
Date: Sun Dec 17 2000 - 18:47:37 GMT-3
Check your cable, is it a crossover or a straight through?
Gary
----- Original Message -----
From: Gordon Olson <golson@psn.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, December 16, 2000 11:08 PM
Subject: Cat3100 with integrated 2503
> I have a Cat 3100 switch with a 2503 integrated into it. I have another
> router 2501 connected via serial port - crossover cable configured for
> frame-relay and that appears to be working fine, passing LMI. Both
> interfaces are up.
>
> But I cannot bring up the Ethernet interface on the 2503. I am not sure
how.
> I have a transceiver connected to the AUI and a cat 5 cable ran to a hub,
I
> have another cable hooked directly to my PC from the hub.
> I verified that there was not a cable or hub problem because I can bring
up
> the e0 int on a different router. But I think because the AUI is actually
on
> the switch and not on the Integrated 2503 is where the problem is.
>
> I configured the 3100 with an Ip address but it still does not work. I
canot
> even ping it from within the switch or within the 2503.
>
> Anyone have a clue for me?
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:03 GMT-3