From: Gordon Olson (golson@xxxxxxx)
Date: Sat Dec 16 2000 - 20:08:52 GMT-3
I have a Cat 3100 switch with a 2503 integrated into it. I have another
router 2501 connected via serial port - crossover cable configured for
frame-relay and that appears to be working fine, passing LMI. Both
interfaces are up.
But I cannot bring up the Ethernet interface on the 2503. I am not sure how.
I have a transceiver connected to the AUI and a cat 5 cable ran to a hub, I
have another cable hooked directly to my PC from the hub.
I verified that there was not a cable or hub problem because I can bring up
the e0 int on a different router. But I think because the AUI is actually on
the switch and not on the Integrated 2503 is where the problem is.
I configured the 3100 with an Ip address but it still does not work. I canot
even ping it from within the switch or within the 2503.
Anyone have a clue for me?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:03 GMT-3