From: zheng jiang gu (zjgu@xxxxxxxxxx)
Date: Mon Dec 11 2000 - 11:26:29 GMT-3
1 IPX snapshot will work even block rip/sap
2 I think for eigrp it is also better to deny it in the dialer-list.Then static
zjgu
----- Original Message -----
From: Justin Menga <Justin.Menga@computerland.co.nz>
To: <ccielab@groupstudy.com>
Sent: Sunday, December 10, 2000 1:44 PM
Subject: Keeping DDR interfaces quiet
> Hi,
>
> For snapshot routing for IPX, if I block any RIP/SAP traffic as interesting
> traffic, does snapshot routing still work (i.e. does it override the
> interesting traffic list, establish a connection for x minutes then go
> quiet?).
>
>
> Can someone please confirm I have the following guidelines correct for each
> protocol:
>
> IP:
>
> Use Passive Interfaces in Routing Protocols to keep DDR interface quiet
> For routing use static/floating statics/snapshot/demand circuit.
>
>
> IPX:
>
> Use access-list to keep line quiet:
>
> access-list 900 deny any any all any rip
> access-list 900 deny any any all any sap
> access-list 900 deny any any all any 457
> access-list 900 deny any any all any 456
> access-list 900 permit any any all any all
>
> dialer-list 1 protocol ipx list 900
>
> For routing use static/floating/snapshot.
> For EIGRP could use LONG timers
>
> Appletalk:
>
> Use no appletalk send-rtmps under DDR interface.
> For routing use static/floating/snapshot
> For EIGRP could use LONG timers
>
>
> Regards,
>
> Justin Menga MCSE+I CCNP CCSE ASE
> WAN Specialist
> Computerland New Zealand
> PO Box 3631, Auckland
> DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
> mailto: justin.menga@computerland.co.nz
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:01 GMT-3