From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Sun Dec 10 2000 - 02:44:27 GMT-3
Hi,
For snapshot routing for IPX, if I block any RIP/SAP traffic as interesting
traffic, does snapshot routing still work (i.e. does it override the
interesting traffic list, establish a connection for x minutes then go
quiet?).
Can someone please confirm I have the following guidelines correct for each
protocol:
IP:
Use Passive Interfaces in Routing Protocols to keep DDR interface quiet
For routing use static/floating statics/snapshot/demand circuit.
IPX:
Use access-list to keep line quiet:
access-list 900 deny any any all any rip
access-list 900 deny any any all any sap
access-list 900 deny any any all any 457
access-list 900 deny any any all any 456
access-list 900 permit any any all any all
dialer-list 1 protocol ipx list 900
For routing use static/floating/snapshot.
For EIGRP could use LONG timers
Appletalk:
Use no appletalk send-rtmps under DDR interface.
For routing use static/floating/snapshot
For EIGRP could use LONG timers
Regards,
Justin Menga MCSE+I CCNP CCSE ASE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:00 GMT-3