From: zhangxianqi (xianqizhang@xxxxxxxx)
Date: Mon Dec 11 2000 - 23:32:37 GMT-3
I use two real isdn line,not ISDN simulator.
----- Original Message -----
From: <SherefMohamed@cdh.org>
To: zhangxianqi <xianqizhang@sina.com>
Cc: <ccielab@groupstudy.com>; <Justin.Menga@computerland.co.nz>; <nobody@groups
tudy.com>
Sent: Tuesday, December 12, 2000 4:07 AM
Subject: Re: isdn
>
> Have you tried to reboot the ISDN simulator !
>
>
>
> "zhangxianqi"
> <xianqizhang@ To: "Justin Menga" <Justin.Menga
@computerland.co.nz>
> sina.com> cc: <ccielab@groupstudy.com>
> Sent by: Subject: Re: isdn
> nobody@groups
> tudy.com
>
>
> 12/10/2000
> 07:30 PM
> Please
> respond to
> "zhangxianqi"
>
>
>
>
>
>
> I do it as script as the CD,and I have try change the speed to 56k,no
> usefull,still get the message.but after reload router,I can success once or
> two callback,after that,I get the message again.
>
> Regards
> xianqi
> ----- Original Message -----
> From: Justin Menga <Justin.Menga@computerland.co.nz>
> To: 'zhangxianqi' <xianqizhang@sina.com>; Daniel Ji <jix@netrue.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Sunday, December 10, 2000 6:29 PM
> Subject: RE: isdn
>
>
> > Maybe try lowering your speed on the dialer map to 56Kbps on either
> > side....??
> >
> > This has nothing to do with any layer 3 protocol, this is the ISDN switch
> > signalling an error in connection. Also check your numbers are correct
> in
> > your dialer map.
> >
> > -----Original Message-----
> > From: zhangxianqi [mailto:xianqizhang@sina.com]
> > Sent: Sunday, December 10, 2000 7:59 PM
> > To: Daniel Ji
> > Cc: ccielab@groupstudy.com
> > Subject: Re: isdn
> >
> >
> > I sure the name and dial string is correct,and i meet it in doing
> appletalk
> > callback,first I think it's because have ip configed in isdn,but i remove
> > all the ip config,I get the message still.
> >
> > Regards
> > xianqi
> > ----- Original Message -----
> > From: Daniel Ji <jix@netrue.com>
> > To: zhangxianqi <zhangxqi@gitc.com.cn>; <ccielab@groupstudy.com>
> > Sent: Saturday, December 09, 2000 8:30 PM
> > Subject: Re: isdn
> >
> >
> > > check your "name" part in dialer map. and make sure your dialer string
> is
> > > correct.
> > >
> > > -----Original Message-----
> > > From: zhangxianqi <zhangxqi@gitc.com.cn>
> > > To: ccielab@groupstudy.com <ccielab@groupstudy.com>
> > > Date: Saturday, December 09, 2000 3:46 AM
> > > Subject: isdn
> > >
> > >
> > > >hi,
> > > >I am doing isdn callback,find a problem,but i can't find the reason.
> > > >
> > > >00:17:17179910144: ISDN BR0/0: RX <- DISCONNECT pd = 8 callref =
> 0x93
> > > >00:17:17179869184: Cause i = 0x82D8 - Incompatible destination
> > > >
> > > >Could some isdn guru tell me what the mean of 'Incompatible
> destination'.
> > > thanks in advance.
> > > >
> > > >
> > > >Regards
> > > >xianqi
> > > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:26:01 GMT-3