From: Erick B. (erickbe@xxxxxxxxx)
Date: Sun Oct 29 2000 - 19:30:57 GMT-3
Additonal note. The distribute-list in has to be done
on each router you want to filter routes on.
Example, if you have setup like A-B-C and you filter a
route out on router B and don't filter it on C, C will
have a route in its table pointing to B but B don't
have a route since it was filtered out.
--- Justin Menga <Justin.Menga@computerland.co.nz>
wrote:
> With LS protocols, you can't use distribute-list out
> commands, as the LS
> protocols do not advertise routes.....
>
> You can use the distribute-list in command under
> router configuration mode
> to control if routes are entered into the IP route
> table. This means that
> the link states are still in the LS database, but
> are just excluded from the
> IP route table.
>
> router ospf 1
> distribute-list 100 in
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:31 GMT-3