From: Wu,Jiang (wujiang@xxxxxxxxx)
Date: Sat Oct 07 2000 - 00:37:10 GMT-3
I think you can only reload in privilege mode or configured that command to be
used in user mode. So you cannot recover a lost password through dial-in.
For the break key, check:
http://www.cisco.com/warp/public/701/61.html
----- Original Message -----
From: Andy Singh <asingh@slamdunknetworks.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 06, 2000 2:48 AM
Subject: How to break the password Thru dial-in
> I know there a was similar thread a while back but this is lil different
>
> I need to recover the password on 3662 via a terminal server. basically the
> setup is something like this
>
> PC (Hyper-term)-----dial-in
> PSTN-------2611(term-server)---console-async(3662). so I dial in to the
> terminal server..then console into the 3662 and reload...then I can't send a
> break to it for it go into bootprom..is there any other dial in program out
> there that I can use. any help be appreciate.
> thanks
> Andy
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:24 GMT-3