From: aiqun hu (huaq@xxxxxxxxxxx)
Date: Tue Sep 26 2000 - 22:03:46 GMT-3
I tested in my lab before. No success. What kind of cable should I use to
connect the two AUX ports together? I couldn't find more info about null
modem cable.
Thanks
>From: "Sam Munzani" <sam@munzani.com>
>Reply-To: "Sam Munzani" <sam@munzani.com>
>To: "James Cochrane" <jcochrane@synapse-consulting.com>,
><ccielab@groupstudy.com>
>Subject: Re: AUX to AUX
>Date: Tue, 26 Sep 2000 11:13:37 -0500
>
>Add following in that config if you want dynamic routing protocols working
>in async.
>int async 1
>async default routing
>
>Then add that network in your routing protocol. e.g. eigrp 1, network
>xxx.xxx.xxx.xxx
>
>Sam
> ----- Original Message -----
> From: James Cochrane
> To: 'ccielab@groupstudy.com'
> Sent: Tuesday, September 26, 2000 10:31 AM
> Subject: RE: AUX to AUX
>
>
> http://www.cisco.com/warp/public/793/access_dial/auxback.html
>
>
> James.
> -----Original Message-----
> From: Tony Olzak [mailto:aolzak@buckeye-express.com]
> Sent: 26 September 2000 16:06
> To: ccielab@groupstudy.com
> Subject: AUX to AUX
>
>
> Guys,
>
> Anyone have a sample config for an AUX to AUX setup?
>
>
> Tony
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:03 GMT-3