From: Sam Munzani (sam@xxxxxxxxxxx)
Date: Tue Sep 26 2000 - 23:20:57 GMT-3
Null modem.
Sam
----- Original Message -----
From: "aiqun hu" <huaq@hotmail.com>
To: <sam@munzani.com>; <jcochrane@synapse-consulting.com>;
<ccielab@groupstudy.com>
Sent: Tuesday, September 26, 2000 8:03 PM
Subject: Re: AUX to AUX
> I tested in my lab before. No success. What kind of cable should I use to
> connect the two AUX ports together? I couldn't find more info about null
> modem cable.
>
> Thanks
>
>
> >From: "Sam Munzani" <sam@munzani.com>
> >Reply-To: "Sam Munzani" <sam@munzani.com>
> >To: "James Cochrane" <jcochrane@synapse-consulting.com>,
> ><ccielab@groupstudy.com>
> >Subject: Re: AUX to AUX
> >Date: Tue, 26 Sep 2000 11:13:37 -0500
> >
> >Add following in that config if you want dynamic routing protocols
working
> >in async.
> >int async 1
> >async default routing
> >
> >Then add that network in your routing protocol. e.g. eigrp 1, network
> >xxx.xxx.xxx.xxx
> >
> >Sam
> > ----- Original Message -----
> > From: James Cochrane
> > To: 'ccielab@groupstudy.com'
> > Sent: Tuesday, September 26, 2000 10:31 AM
> > Subject: RE: AUX to AUX
> >
> >
> > http://www.cisco.com/warp/public/793/access_dial/auxback.html
> >
> >
> > James.
> > -----Original Message-----
> > From: Tony Olzak [mailto:aolzak@buckeye-express.com]
> > Sent: 26 September 2000 16:06
> > To: ccielab@groupstudy.com
> > Subject: AUX to AUX
> >
> >
> > Guys,
> >
> > Anyone have a sample config for an AUX to AUX setup?
> >
> >
> > Tony
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:03 GMT-3