From: Rupawala, Honeid (rupawala@xxxxxxxxxxxxxxxxx)
Date: Mon Sep 25 2000 - 16:46:28 GMT-3
Hi team,
Pls. provide your feedback on this.
Assume I have a ASBR in OSPF running EIGRP with the outside domain. This
router has say 2 interfaces, s0 and eth0. s0 lies in OSPF area 0 and e0 is
on EIGRP.
Also both these segments are on different subnets, but of the same major
network. For eg., s0 has ip add of 172.16.1.1 /24 and e0 has ip add of
172.16.2.1/24.
Now if I run EIGRP , the s0 interface will also have EIGRP running, since
the network statement under the EIGRP process truncates to a classful
network.
When redistributing OSPF into EIGRP, all OSPF networks except that of s0
will appear as D EX routes to downstream EIGRP routers. The s0 network will
appear to be
a D ( ie an internal network ). How can I avoid this ? I want that the s0
net should appear as D EX.
I tried increasing the AD of D routes from 90 to 180 but didn,t work.
Regards
Honeid.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:02 GMT-3