Re: please help on Token ring

From: Daniel Ji (jix@xxxxxxxxxx)
Date: Wed Sep 20 2000 - 21:46:33 GMT-3

   
THANKS BUDDY!!

I know this list is awesome! I did as you suggested and the TR interface is
UP now!! I'm new to this list and now I do feel I will learn a lot form you
Cisco gurus and hope I can help others more as I learn more. ^_^

Thank you all for your kind help!

Daniel.

----- Original Message -----
From: "Maljure, Sanjay" <smaljure@cibernetworks.com>
To: "'Daniel Ji'" <jix@netrue.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, September 20, 2000 5:16 PM
Subject: RE: please help on Token ring

> Hi
> Set both the "wrap" buttons to enabled
> Connect the cable to the left connector (of the pair). You will notice
that
> each port on the MAU wil basically have two connectors. Connect to the
left
> connector of this pair.
> Hardcode your TR interface speed.
> Let us know if this helps
> Sanjay
>
> -----Original Message-----
> From: Daniel Ji [mailto:jix@netrue.com]
> Sent: Wednesday, September 20, 2000 7:51 PM
> To: CCIE Lab Mailling List
> Subject: please help on Token ring
>
>
> Hi:
> Could anyone tell me what other thing I can try in order to bring my
> token-ring interface up? I connected the TR interface with an RJ45 strait
> cable to MAU(SMC Elite MAU 4016RN), but the interface is always in init
> mode, and the port status light on the MAU was swithing between on and off
> repeatedly. below is the screen output from router. please shed some light
> on it.
> -------------------------------------------------------------------------- 

--
> -----------------------------------------------
> TokenRing0 is initializing, line protocol is down
>   Hardware is TMS380, address is 0007.0dc6.df6d (bia 0007.0dc6.df6d)
>   MTU 4464 bytes, BW 4000 Kbit, DLY 2500 usec, rely 255/255, load 1/255
>   Encapsulation SNAP, loopback not set, keepalive set (10 sec)
>   ARP type: SNAP, ARP Timeout 04:00:00
>   Ring speed: 4 Mbps
>   Single ring node, Source Route Transparent Bridge capable
>   Group Address: 0x00000000, Functional Address: 0x08000000
>   Ethernet Transit OUI: 0x000000
>   Last input never, output never, output hang never
>   Last clearing of "show interface" counters never
>   Queueing strategy: fifo
>   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
>   5 minute input rate 0 bits/sec, 0 packets/sec
>   5 minute output rate 0 bits/sec, 0 packets/sec
>      0 packets input, 0 bytes, 0 no buffer
>      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
>      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
>      0 packets output, 0 bytes, 0 underruns
>      0 output errors, 0 collisions, 166148 interface resets
>      0 output buffer failures, 0 output buffers swapped out
>      166153 transitions
> --------------------------------------------------------------------------
--
> -----------------------------------------------
>
> Thanks a lot!
>
> Daniel
>

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:59 GMT-3