RE: please help on Token ring

From: Maljure, Sanjay (smaljure@xxxxxxxxxxxxxxxxx)
Date: Wed Sep 20 2000 - 21:16:46 GMT-3


   
Hi
Set both the "wrap" buttons to enabled
Connect the cable to the left connector (of the pair). You will notice that
each port on the MAU wil basically have two connectors. Connect to the left
connector of this pair.
Hardcode your TR interface speed.
Let us know if this helps
Sanjay

-----Original Message-----
From: Daniel Ji [mailto:jix@netrue.com]
Sent: Wednesday, September 20, 2000 7:51 PM
To: CCIE Lab Mailling List
Subject: please help on Token ring

Hi:
Could anyone tell me what other thing I can try in order to bring my
token-ring interface up? I connected the TR interface with an RJ45 strait
cable to MAU(SMC Elite MAU 4016RN), but the interface is always in init
mode, and the port status light on the MAU was swithing between on and off
repeatedly. below is the screen output from router. please shed some light
on it.
----------------------------------------------------------------------------
-----------------------------------------------
TokenRing0 is initializing, line protocol is down
  Hardware is TMS380, address is 0007.0dc6.df6d (bia 0007.0dc6.df6d)
  MTU 4464 bytes, BW 4000 Kbit, DLY 2500 usec, rely 255/255, load 1/255
  Encapsulation SNAP, loopback not set, keepalive set (10 sec)
  ARP type: SNAP, ARP Timeout 04:00:00
  Ring speed: 4 Mbps
  Single ring node, Source Route Transparent Bridge capable
  Group Address: 0x00000000, Functional Address: 0x08000000
  Ethernet Transit OUI: 0x000000
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Queueing strategy: fifo
  Output queue 0/40, 0 drops; input queue 0/75, 0 drops
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 166148 interface resets
     0 output buffer failures, 0 output buffers swapped out
     166153 transitions
----------------------------------------------------------------------------
-----------------------------------------------

Thanks a lot!

Daniel



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:59 GMT-3