From: Brian Stewart (brian@xxxxxxxxxxxxxxxx)
Date: Fri Sep 15 2000 - 15:09:33 GMT-3
You can directly connect T1 CSU-DSU moudules using a homemade Cat 5 type
cable with rj 45 jacks. Use pins 1,2 and 4,5 and then cross 1 to 4 and 2 to
5 on the other end. Plug it in and you should get green lights. I'm using
this in my lab between 2 csu moudules and it works great.
Brian
-----Original Message-----
From: abdul_rahim@ccsi.canon.com
To: ccielab@groupstudy.com
Sent: 9/15/00 11:47 AM
Subject: Help needed on Modular routers 3640 and 2611,Challenge for my self
and the group
Hi I have 3 of my routers which are being used for lab purposes ,
They all have Bulit in CSU/DSUs modules on 3640 called 1E2W and 2611
with
bulit in CSU/DSus as well
can I interconnect those T1 modules via a cross or straight cable
???????
with any sort of tricks on configurations so that I can use that
importatnt
ports for lab purposes,Even I get a hint I'll be glad to hear it
Its a problem which will
Thanks
Abdul
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:56 GMT-3