From: Richard Mott (richpmott@xxxxxxxxxxx)
Date: Thu Aug 24 2000 - 13:10:34 GMT-3
set port auxiliaryvlan is the command on 5.5 software but I don't know if
it's available on the 5500.
Rich Mott
CCIE #5234 (R&S)(ISP/Dial)
Internetwork Solutions Engineer
Thrupoint INC
>From: rajkumarr <rajkumarr@infy.com>
>Reply-To: rajkumarr <rajkumarr@infy.com>
>To: ccielab@groupstudy.com
>Subject: IP Phones in Catalyst5500
>Date: Thu, 24 Aug 2000 13:07:11 +0530
>
>Cisco's IP Phones have two switched ports and hence only one port is
>required at the switch end to connect the IP Phone.
>
>-------Cat5500----------IPPhone--PC
>
>Now if we want the IP Phones to be in a separate VLAN than the PC, how do
>we
>do it.
>In other words, how can a Catalyst5500 port be configured to be a part of 2
>VLANs.
>
>The requirement is :
>Call Manager and the IP Phones should be in VLAN A.
>All PCs should be in VLAN B.
>The above components are connected to Cat5500.
>
>Give a sample config.
>
>Raj
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3