From: rajkumarr (rajkumarr@xxxxxxxx)
Date: Thu Aug 24 2000 - 04:37:11 GMT-3
Cisco's IP Phones have two switched ports and hence only one port is
required at the switch end to connect the IP Phone.
-------Cat5500----------IPPhone--PC
Now if we want the IP Phones to be in a separate VLAN than the PC, how do we
do it.
In other words, how can a Catalyst5500 port be configured to be a part of 2
VLANs.
The requirement is :
Call Manager and the IP Phones should be in VLAN A.
All PCs should be in VLAN B.
The above components are connected to Cat5500.
Give a sample config.
Raj
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:29 GMT-3