From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Sat Aug 19 2000 - 10:58:21 GMT-3
Damien,
They are rather specific in their questions. Anything else that works
is usually acceptable as long as you meet the specifications they've given
you.
B.
On Sat, 19 Aug 2000, damien wrote:
> Just regarding configuration solutions in the Lab. Is any configuration
> acceptable in the Lab as long as it works. What I am getting at is
> configurtions in the Lab as we all know are unreal for the most part,
> but there is also configurations which are only for a Lab environment.
>
> As an example. If you are configuring a Typical Frame relay set up where
> you are required only on certain interfaces to use the physical others
> to use subs, others where you are not allowed to use inverse-arp and
> limited to one frame map statement etc etc.....
>
> Is it okay to use things like policy route-maps to set next hops...ip
> local policys for traffic originated by the Router etc. etc..........
>
> This is a hard Q to put in writing...........
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3