From: David H. Brown (DHBrown@xxxxxxxxxxxx)
Date: Sat Aug 19 2000 - 11:12:08 GMT-3
Damien,
Any configuration that meets the requirements stated (and that means
ALL of the requirements) is allowed. We all know there are multiple
ways of achieving the same result within IOS, but sometimes you will
be restricted in which commands you can use. So my rule of thumb is
to know every different way to achieve any required result in every
technology within IOS. If you can do that, you are an expert.
David
(RTP lab 9/18)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
damien
Sent: Saturday, August 19, 2000 5:15 AM
To: ccielab@groupstudy.com
Subject: Lab Q ?
Just regarding configuration solutions in the Lab. Is any
configuration
acceptable in the Lab as long as it works. What I am getting at is
configurtions in the Lab as we all know are unreal for the most part,
but there is also configurations which are only for a Lab environment.
As an example. If you are configuring a Typical Frame relay set up
where
you are required only on certain interfaces to use the physical others
to use subs, others where you are not allowed to use inverse-arp and
limited to one frame map statement etc etc.....
Is it okay to use things like policy route-maps to set next hops...ip
local policys for traffic originated by the Router etc. etc..........
This is a hard Q to put in writing...........
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:27 GMT-3