From: Daniel Beynon (dbeynon@xxxxxxxxxxx)
Date: Mon Aug 07 2000 - 16:19:48 GMT-3
How is your frame set up. You must be using map statements
since you have fr inverse arp off. Are all of the spokes
on the same cable range? Also supply interface portions of the
configs so we can review.
>From: "Varghese Thomas" <vnthomas@hotmail.com>
>Reply-To: "Varghese Thomas" <vnthomas@hotmail.com>
>To: "'Ccielab" <ccielab@groupstudy.com>
>Subject: Appletalk & EIGRP over a NBMA
>Date: Mon, 7 Aug 2000 22:09:34 -0000
>
>Hello,
>
>The set-up is 1 hub with 4 sopkes running EIGRAP in a FR cloud
>
>Hub has the following conf.
>
>no split horizon disabled
>appletalk local routing
>
>Common settings in hub & sopke
>
>appletalk routing egirp XX (xx is uniuqe )
>
>network wan
>appletalk protocol eigrp
>no appletalk protocol rtmp
>no frame-realy inver-arp
>
>In addition, all routers have proper PVC statements
>
>Issue:
>
>Hub(r1) & one of the spoke(4) works fine with their FR. AT. int comes up.
>sopke 2 & 3 never comes up in terms of AT int. Hub's cable/zone is gettings
>verified by either r2 or r3 or even with r4(case by case) as well as spoke
>4 is also getting verified by rest of the routers.
>
>r2 & r3 shows "aquiring port net information", but never gets established
>and status of the resp. AT int is down.
>I tried without EIGRP also, but the result is the same.
>
>Both spoke 2 &3 is running IOS 12.0(3)T3 and hub is 11.0(3) & spoke 4 is
>12.0(1)
>
>Any hints pls?
>
>Tx n RD
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3