From: William Swedberg (swedbergwp@xxxxxxxxx)
Date: Mon Aug 07 2000 - 16:18:06 GMT-3
You have disabled invers-arp on the spokes. Do you
have a frame map apple statements in the spokes and if
so do you have broadcast Keyword?
William Swedberg CCNP CCDP
--- Varghese Thomas <vnthomas@hotmail.com> wrote:
> Hello,
>
> The set-up is 1 hub with 4 sopkes running EIGRAP in
> a FR cloud
>
> Hub has the following conf.
>
> no split horizon disabled
> appletalk local routing
>
> Common settings in hub & sopke
>
> appletalk routing egirp XX (xx is uniuqe )
>
> network wan
> appletalk protocol eigrp
> no appletalk protocol rtmp
> no frame-realy inver-arp
>
> In addition, all routers have proper PVC statements
>
> Issue:
>
> Hub(r1) & one of the spoke(4) works fine with their
> FR. AT. int comes up.
> sopke 2 & 3 never comes up in terms of AT int. Hub's
> cable/zone is gettings verified by either r2 or r3
> or even with r4(case by case) as well as spoke 4 is
> also getting verified by rest of the routers.
>
> r2 & r3 shows "aquiring port net information", but
> never gets established and status of the resp. AT
> int is down.
> I tried without EIGRP also, but the result is the
> same.
>
> Both spoke 2 &3 is running IOS 12.0(3)T3 and hub is
> 11.0(3) & spoke 4 is 12.0(1)
>
> Any hints pls?
>
> Tx n RD
>
=====
William Swedberg CCNP CCDP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3