From: William Swedberg (bs.ccie@xxxxxxxx)
Date: Sun Aug 06 2000 - 19:27:41 GMT-3
Sorry, I told you not to forget the broadcast keyword and I forgot it
myself. In the R1# configs map-list add the keyword BROADCAST to the end of
each map statement and then IT will be a working config.
> Try configuring the ILMI pvc on your atm interface. on the physical.
> atm pvc 2 0 16 ilmi
>
> this will show the network prefix that the atm switch is broadcasting.
view
> this by using the "show atm ilmi-status"
>
> Interface : ATM1/0 Interface Type : Private UNI (User-side)
> ILMI VCC : (0, 16) ILMI Keepalive : Disabled
> ILMI State: UpAndNormal
> Peer IP Addr: 0.0.0.0 Peer IF Name: ATM10/0/0
> Peer MaxVPIbits: 8 Peer MaxVCIbits: 14
> Active Prefix(s) :
> 47.0091.8100.0000.0001.6309.1401 <------here is the prefix
> End-System Registered Address(s) :
> 47.0091.8100.0000.0001.6309.1401.1234.5678.1111.11(Confirmed)
>
> take the above prefix and add the esi part of the NSAP
> ie. 123456781111.11
>
> The prex will be the same for ALL atm devices attached to the ATM switch.
> You can come up with you own ESI.
>
>
> here is a working config
> R1#
>
> interface ATM1/0
> no ip address
> no ip directed-broadcast
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM1/0.13 multipoint
> ip address 192.168.13.1 255.255.255.0
> no ip directed-broadcast
> map-group atm
> atm esi-address 123456781111.11
> atm arp-server self
> appletalk cable-range 13-13 13.1
> appletalk zone ATM
> appletalk protocol eigrp
> no appletalk protocol rtmp
> ipx network 13
>
> also you need to map the layer 3 to the layer 2 NSAP, use a map-list and
> apply it with the map-group on the interface
>
> map-list atm
> appletalk 13.3 atm-nsap 47.009181000000000163091401.123456783333.33
> ip 192.168.13.3 atm-nsap 47.009181000000000163091401.123456783333.33
> ipx 13.0000.0000.3333 atm-nsap
47.009181000000000163091401.123456783333.33
>
>
> here is the other side...
>
> interface ATM1/0
> no ip address
> no ip directed-broadcast
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> no atm ilmi-keepalive
> !
> interface ATM1/0.13 multipoint
> ip address 192.168.13.3 255.255.255.0
> no ip directed-broadcast
> map-group atm
> atm esi-address 123456783333.33
> atm arp-server nsap 47.009181000000000163091401.123456781111.11
> appletalk cable-range 13-13 13.3
> appletalk zone ATM
> appletalk protocol eigrp
> no appletalk protocol rtmp
> ipx network 13
> !
> ip classless
> no ip http server
> !
> !
> map-list atm
> appletalk 13.1 atm-nsap 47.009181000000000163091401.123456781111.11
> broadcast
> ipx 13.0000.0000.1111 atm-nsap
47.009181000000000163091401.123456781111.11
> broadcast
> ip 192.168.13.1 atm-nsap 47.009181000000000163091401.123456781111.11
> broadcast
>
> Don't forget the keyword broadcast in the map statment, apple will not
come
> up if you do.
> Also, hard code the apple node number. This way you can do the map
> statement. APPLE CABLE-RANGE 13-13 13.1
>
> I'll be here a while if you have questions.
>
> William Swedberg CCNP CCDP
> ----- Original Message -----
> From: Earl Aboytes <earl@linkline.com>
> To: Feliz, Edgar <Edgar.Feliz@BTNA.com>; <ccielab@groupstudy.com>
> Sent: Sunday, August 06, 2000 5:39 PM
> Subject: RE: ATM clip with full nsap address
>
>
> > My config is directly from the DOC CD
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Earl Aboytes
> > Senior Technical Conultant
> > GTE Managed Solutions
> > 805-381-8817
> > earl.aboytes@verizon.com
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > -----Original Message-----
> > From: Feliz, Edgar [mailto:Edgar.Feliz@BTNA.com]
> > Sent: Sunday, August 06, 2000 2:33 PM
> > To: Earl Aboytes; ccielab@groupstudy.com
> > Subject: RE: ATM clip with full nsap address
> >
> > Earl, Here is a sample CLIP config.
> >
> > interface ATM3/0.1 multipoint
> > ip address 192.40.100.1 255.255.255.0
> > atm esi-address 111111111111.00
> > atm arp-server nsap 47.009181000000006083C58601.777777777777.00
> >
> > I do not see the ESI address in yours.
> >
> > EF
> >
> > -----Original Message-----
> > From: Earl Aboytes [mailto:earl@linkline.com]
> > Sent: Sunday, August 06, 2000 5:02 PM
> > To: ccielab@groupstudy.com
> > Subject: ATM clip with full nsap address
> >
> >
> > Has anyone ever gotten this working? I cannot seem to get this working.
> It
> > works fine if I just use the esi address and have the LS1010 in the
> middle.
> > Any ideas?
> >
> > interface atm 2/0
> > atm nsap-address ac.2456.78.040000.0000.0000.0000.0000.0000.0000.00
> > ip address 10.0.0.2 255.0.0.0
> > pvc 0/5 qsaal
> > atm arp-server nsap ac.1533.66.020000.0000.0000.0000.0000.0000.0000.00
> >
> > .
> >
> > interface atm 0/0
> > ip address 10.0.0.1 255.0.0.0
> > atm nsap-address ac.1533.66.020000.0000.0000.0000.0000.0000.0000.00
> > pvc 0/5 qsaal
> > atm arp-server self
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Earl Aboytes
> > Senior Technical Conultant
> > GTE Managed Solutions
> > 805-381-8817
> > earl.aboytes@verizon.com
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3