From: William Swedberg (bs.ccie@xxxxxxxx)
Date: Sun Aug 06 2000 - 19:18:24 GMT-3
Try configuring the ILMI pvc on your atm interface. on the physical.
atm pvc 2 0 16 ilmi
this will show the network prefix that the atm switch is broadcasting. view
this by using the "show atm ilmi-status"
Interface : ATM1/0 Interface Type : Private UNI (User-side)
ILMI VCC : (0, 16) ILMI Keepalive : Disabled
ILMI State: UpAndNormal
Peer IP Addr: 0.0.0.0 Peer IF Name: ATM10/0/0
Peer MaxVPIbits: 8 Peer MaxVCIbits: 14
Active Prefix(s) :
47.0091.8100.0000.0001.6309.1401 <------here is the prefix
End-System Registered Address(s) :
47.0091.8100.0000.0001.6309.1401.1234.5678.1111.11(Confirmed)
take the above prefix and add the esi part of the NSAP
ie. 123456781111.11
The prex will be the same for ALL atm devices attached to the ATM switch.
You can come up with you own ESI.
here is a working config
R1#
interface ATM1/0
no ip address
no ip directed-broadcast
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
!
interface ATM1/0.13 multipoint
ip address 192.168.13.1 255.255.255.0
no ip directed-broadcast
map-group atm
atm esi-address 123456781111.11
atm arp-server self
appletalk cable-range 13-13 13.1
appletalk zone ATM
appletalk protocol eigrp
no appletalk protocol rtmp
ipx network 13
also you need to map the layer 3 to the layer 2 NSAP, use a map-list and
apply it with the map-group on the interface
map-list atm
appletalk 13.3 atm-nsap 47.009181000000000163091401.123456783333.33
ip 192.168.13.3 atm-nsap 47.009181000000000163091401.123456783333.33
ipx 13.0000.0000.3333 atm-nsap 47.009181000000000163091401.123456783333.33
here is the other side...
interface ATM1/0
no ip address
no ip directed-broadcast
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
!
interface ATM1/0.13 multipoint
ip address 192.168.13.3 255.255.255.0
no ip directed-broadcast
map-group atm
atm esi-address 123456783333.33
atm arp-server nsap 47.009181000000000163091401.123456781111.11
appletalk cable-range 13-13 13.3
appletalk zone ATM
appletalk protocol eigrp
no appletalk protocol rtmp
ipx network 13
!
ip classless
no ip http server
!
!
map-list atm
appletalk 13.1 atm-nsap 47.009181000000000163091401.123456781111.11
broadcast
ipx 13.0000.0000.1111 atm-nsap 47.009181000000000163091401.123456781111.11
broadcast
ip 192.168.13.1 atm-nsap 47.009181000000000163091401.123456781111.11
broadcast
Don't forget the keyword broadcast in the map statment, apple will not come
up if you do.
Also, hard code the apple node number. This way you can do the map
statement. APPLE CABLE-RANGE 13-13 13.1
I'll be here a while if you have questions.
William Swedberg CCNP CCDP
----- Original Message -----
From: Earl Aboytes <earl@linkline.com>
To: Feliz, Edgar <Edgar.Feliz@BTNA.com>; <ccielab@groupstudy.com>
Sent: Sunday, August 06, 2000 5:39 PM
Subject: RE: ATM clip with full nsap address
> My config is directly from the DOC CD
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Earl Aboytes
> Senior Technical Conultant
> GTE Managed Solutions
> 805-381-8817
> earl.aboytes@verizon.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> -----Original Message-----
> From: Feliz, Edgar [mailto:Edgar.Feliz@BTNA.com]
> Sent: Sunday, August 06, 2000 2:33 PM
> To: Earl Aboytes; ccielab@groupstudy.com
> Subject: RE: ATM clip with full nsap address
>
> Earl, Here is a sample CLIP config.
>
> interface ATM3/0.1 multipoint
> ip address 192.40.100.1 255.255.255.0
> atm esi-address 111111111111.00
> atm arp-server nsap 47.009181000000006083C58601.777777777777.00
>
> I do not see the ESI address in yours.
>
> EF
>
> -----Original Message-----
> From: Earl Aboytes [mailto:earl@linkline.com]
> Sent: Sunday, August 06, 2000 5:02 PM
> To: ccielab@groupstudy.com
> Subject: ATM clip with full nsap address
>
>
> Has anyone ever gotten this working? I cannot seem to get this working.
It
> works fine if I just use the esi address and have the LS1010 in the
middle.
> Any ideas?
>
> interface atm 2/0
> atm nsap-address ac.2456.78.040000.0000.0000.0000.0000.0000.0000.00
> ip address 10.0.0.2 255.0.0.0
> pvc 0/5 qsaal
> atm arp-server nsap ac.1533.66.020000.0000.0000.0000.0000.0000.0000.00
>
> .
>
> interface atm 0/0
> ip address 10.0.0.1 255.0.0.0
> atm nsap-address ac.1533.66.020000.0000.0000.0000.0000.0000.0000.00
> pvc 0/5 qsaal
> atm arp-server self
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Earl Aboytes
> Senior Technical Conultant
> GTE Managed Solutions
> 805-381-8817
> earl.aboytes@verizon.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3