From: Feliz, Edgar (Edgar.Feliz@xxxxxxxx)
Date: Sun Aug 06 2000 - 18:33:23 GMT-3
Earl, Here is a sample CLIP config.
interface ATM3/0.1 multipoint
ip address 192.40.100.1 255.255.255.0
atm esi-address 111111111111.00
atm arp-server nsap 47.009181000000006083C58601.777777777777.00
I do not see the ESI address in yours.
EF
-----Original Message-----
From: Earl Aboytes [mailto:earl@linkline.com]
Sent: Sunday, August 06, 2000 5:02 PM
To: ccielab@groupstudy.com
Subject: ATM clip with full nsap address
Has anyone ever gotten this working? I cannot seem to get this working. It
works fine if I just use the esi address and have the LS1010 in the middle.
Any ideas?
interface atm 2/0
atm nsap-address ac.2456.78.040000.0000.0000.0000.0000.0000.0000.00
ip address 10.0.0.2 255.0.0.0
pvc 0/5 qsaal
atm arp-server nsap ac.1533.66.020000.0000.0000.0000.0000.0000.0000.00
.
interface atm 0/0
ip address 10.0.0.1 255.0.0.0
atm nsap-address ac.1533.66.020000.0000.0000.0000.0000.0000.0000.00
pvc 0/5 qsaal
atm arp-server self
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Earl Aboytes
Senior Technical Conultant
GTE Managed Solutions
805-381-8817
earl.aboytes@verizon.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:24:22 GMT-3