From: J K (jim_koniecki@xxxxxxxxxxx)
Date: Thu Jul 27 2000 - 17:09:40 GMT-3
Hit Control + Alt + Deleate
can i get your output of debug ip ospf events
Thanks
>From: "Ken Fee" <kfee@cisco.com>
>Reply-To: "Ken Fee" <kfee@cisco.com>
>To: "Aaron DuShey" <adushey@yahoo.com>
>CC: "Ccielab" <ccielab@groupstudy.com>
>Subject: Re: bootcamp lab 1-r3-r4 stuck in INIT-why?
>Date: Thu, 27 Jul 2000 15:30:57 -0400
>
>Probably a timer mismatch. Try "debug ip ospf events".
>
>Ken
>
>----- Original Message -----
>From: "Aaron DuShey" <adushey@yahoo.com>
>To: "CCIE (E-mail)" <ccielab@groupstudy.com>
>Sent: Wednesday, July 26, 2000 7:45 PM
>Subject: bootcamp lab 1-r3-r4 stuck in INIT-why?
>
>
> > I can't get r3-r4 to become adjacent. They are stuck in init? Any hints?
> > ip tcp synwait-time 5
> > no ip domain-lookup
> > !
> > !
> > voice-port 1/0/0
> > !
> > voice-port 1/0/1
> > !
> > voice-port 1/1/0
> > !
> > voice-port 1/1/1
> > !
> > !
> > interface Loopback0
> > ip address 10.44.1.1 255.255.255.0
> > !
> > interface Loopback1
> > ip address 10.44.2.1 255.255.255.0
> > !
> > interface BRI0/0
> > no ip address
> > shutdown
> > !
> > interface Ethernet0/0
> > ip address 10.4.1.1 255.255.0.0
> > no lat enabled
> > !
> > interface Serial0/0
> > ip address 10.34.1.2 255.255.0.0
> > no ip mroute-cache
> > !
> > interface TokenRing0/0
> > no ip address
> > shutdown
> > ring-speed 16
> > !
> > router ospf 1
> > network 10.4.0.0 0.0.255.255 area 3
> > network 10.34.0.0 0.0.255.255 area 3
> > network 10.44.0.0 0.0.255.255 area 44
> > area 3 virtual-link 10.34.1.1
> > area 44 range 10.44.0.0 255.255.0.0
> > !
> > ip classless
> > logging buffered 4096 debugging
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > logging synchronous
> > line aux 0
> > line vty 0 4
> > login
> > !
> > interface Ethernet0/0
> > no ip address
> > shutdown
> > no lat enabled
> > !
> > interface Serial0/0
> > ip address 10.10.1.3 255.255.0.0
> > encapsulation frame-relay
> > ip ospf priority 0
> > no ip mroute-cache
> > ip policy route-map frame
> > no fair-queue
> > frame-relay map ip 10.10.1.1 301 broadcast
> > !
> > interface TokenRing0/0
> > ip address 10.3.1.1 255.255.0.0
> > ring-speed 16
> > !
> > interface Serial0/1
> > ip address 10.34.1.1 255.255.0.0
> > clockrate 8000000
> > !
> > interface FastEthernet1/0
> > no ip address
> > shutdown
> > no lat enabled
> > !
> > router ospf 1
> > network 10.10.1.0 0.0.0.255 area 0
> > network 10.34.0.0 0.0.255.255 area 3
> > area 3 virtual-link 10.44.2.1
> > ospf log-adjacency-changes
> > !
> > ip local policy route-map frame
> > ip classless
> > logging buffered 4096 debugging
> > access-list 100 deny ip any 10.3.0.0 0.0.255.255
> > access-list 100 deny ip any 10.34.0.0 0.0.255.255
> > access-list 100 deny ip any 10.44.0.0 0.0.255.255
> > access-list 100 deny ip any 10.4.0.0 0.0.255.255
> > access-list 100 permit ip any any
> > route-map frame permit 10
> > match ip address 100
> > set ip next-hop 10.10.1.1
> > !
> > !
> > !
> > line con 0
> > exec-timeout 0 0
> > logging synchronous
> > line aux 0
> > line vty 0 4
> > login
> > !
> > end
> > r3#
> > end
> > r3#sh ip ospf neig
> > Neighbor ID Pri State Dead Time Address Interface
> > 10.10.1.1 1 FULL/DR 00:01:52 10.10.1.1 Serial0/0
> > 10.44.2.1 1 INIT/ - 00:00:37 10.34.1.2 Serial0/1
> > r3#
> > thanks
> > ad
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3