From: Michelle T (mtruman@xxxxxxxxxxxxxxx)
Date: Thu Jul 27 2000 - 12:35:48 GMT-3
http://www.cisco.com/warp/public/471/50.html
I think this link will tell you what you need to know...
Michelle
----- Original Message -----
From: "Philip Lai" <philip@home.com.hk>
To: <ccielab@groupstudy.com>
Sent: Thursday, July 27, 2000 9:18 AM
Subject: US Robotic modem command !
> Hi, maybe it is sligthly out of the topic. Every time I reverse telnet to
> the US Robotic modem and
> type a "at&fs0=1" then "at&w". The modem is working correctly and can
> receive incoming call.
>
> However, if I switch off the modem and switch on again, all the setting in
> the modem will lost. Thus, I have
> to repeat the above procedure again.
>
> Any body can give me some guideline from the "AT" command on how to store
> the config in the modem and how to display them ?
>
> Thanks.
>
> Philip Lai
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:58 GMT-3