From: Kent (cciecn@xxxxxxxxx)
Date: Tue Jul 18 2000 - 14:57:37 GMT-3
I think EIGREP is an exception.
Kent
--- Lawrence Dwyer <dwyer@tatrc.org> wrote:
> In other words, it works like it is supposed to
> after you enter the
> command no split which should be default for that
> config?
>
> According to Caslow,
> SH is DIS on FR physical interfaces
> SH is EN on FR point-2-point IP subints
> SH is EN on FR multipt. subints
>
> Unless it is a bug in yur particular IOS ver.
> I will try it tomorrow night with both 12.0 and 11.1
> Larry
>
> John Conzone wrote:
>
> > I have a hub and spoke config with FR, and am
> running EIGRP. The
> > hub will not pass spoke routes to other spokes
> unless I have split
> > horizon disabled on the hub serial int. I am using
> all physical
> > interfaces. By default, split horizon should be
> already disabled on a
> > FR physical int. Anyone else run into this?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3