From: Keith Kruepke (lister@xxxxxxxxxxx)
Date: Tue Jul 18 2000 - 14:50:00 GMT-3
Andy,
First thing, I would try to make sure that it is OSPF bringing up the line. Yo
u should see a destination of 224.0.0.5 as the dial reason in the 'show dialer'
output or in the packets in 'debug dialer' messages.
One common issue is using one of the two endpoint routers as a redistribution p
oint in your network. This can lead to feedback from the other routing protoco
l.
Finally, it seems that several people on the list have experienced some strange
behavior with various IOSes. You may want to attempt an upgrade of one or bot
h routers to see if that changes anything.
Good luck,
Keith
----- Original Message -----
From: "Andy Singh" <ansingh@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, July 18, 2000 11:30 AM
Subject: How to configure OSPF over ISDN/DDR
Hello
Can any1 tell me how to configure OSPF over ISDN line so hello packets won't br
ing up the circuit. i think you can do "ip ospf demand circuit" inteface comman
d but i can't get it to work like that.
i'd appreciate any help
Andy
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:54 GMT-3