disabling client-to-client reflection

From: Jeff Sapiro (jsapiro@xxxxxxxxxxxxxxxxxxxx)
Date: Thu Jun 15 2000 - 14:18:28 GMT-3

• Next message: Ron.Fuller@xxxxxx: "IOS Firewall"
• Previous message: Jason T. Rohm: "RE: If the Break key function is disabled"
• Next in thread: Byju Pularikkal: "Re: disabling client-to-client reflection"
• Maybe reply: Byju Pularikkal: "Re: disabling client-to-client reflection"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Example from CCO:
In the following example, the local router is a route reflector. The
three neighbors are fully meshed, so client-to-client reflection is
disabled.

router bgp 5
 neighbor 155.24.95.22 route-reflector-client
 neighbor 155.24.95.23 route-reflector-client
 neighbor 155.24.95.24 route-reflector-client
 no bgp client-to-client reflection

My question is, why have these configured as route-reflector clients to
begin with?
-Jeff

• Next message: Ron.Fuller@xxxxxx: "IOS Firewall"
• Previous message: Jason T. Rohm: "RE: If the Break key function is disabled"
• Next in thread: Byju Pularikkal: "Re: disabling client-to-client reflection"
• Maybe reply: Byju Pularikkal: "Re: disabling client-to-client reflection"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3