RE: If the Break key function is disabled

From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Thu Jun 15 2000 - 09:48:13 GMT-3

• Next message: Jeff Sapiro: "disabling client-to-client reflection"
• Previous message: Jeff Sapiro: "Re: BGP sync - ping xuping"
• Maybe in reply to: Chandra: "If the Break key function is disabled"
• Next in thread: Brian Hescock: "Re: If the Break key function is disabled"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
The break key functions for a number of seconds immediately after a cold reboot
, regardless of the config-register settings.

-Jason T. Rohm
 jtrohm@athenet.net

-----Original Message-----
From: Brian Hescock [SMTP:bhescock@cisco.com]
Sent: Thursday, June 15, 2000 7:04 AM
To: Chandra
Cc: ccielab@groupstudy.com
Subject: Re: If the Break key function is disabled

Well, if you could configure the config-register that would mean you had
the password... so I'll I can think of is replacing the NVRAM. Otherwise,
you probably have bought yourself a nice boat anchor.

Brian

On Thu, 15 Jun 2000, Chandra wrote:

> Hi
> If the Break key is disabled in the config register, how do we do password
> recovery?
> Regards
> Chandra
>

• Next message: Jeff Sapiro: "disabling client-to-client reflection"
• Previous message: Jeff Sapiro: "Re: BGP sync - ping xuping"
• Maybe in reply to: Chandra: "If the Break key function is disabled"
• Next in thread: Brian Hescock: "Re: If the Break key function is disabled"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:42 GMT-3