From: abcd abcd (abcd_efg_30001@xxxxxxxxx)
Date: Fri Jun 02 2000 - 04:50:40 GMT-3
Hi, everyone, here is the problem.
I have 3 routers in hub-and-spoke fr.
r1,r3 is spoke, and r2 is hub, like that:
-(e0)r1------vc------r2-----vc-----r3(e0)
spoke hub spoke
when i set r1 e0 join in multi-group 234.5.6.7, and r1
should be rp in sparse-mode.
the client is r3 e0 can't join the multi-group, and r3
also can't ping the address 234.5.6.7.
here is config:
r1
=============
inter e0
ip add 1.1.1.1 255.255.255.0
ip igmp join 234.5.6.7
ip pim sparse-mode
inter s0
en frame
ip add 1.1.123.1 255.255.255.0
frame map ip 1.1.123.2 102 bro
frame map ip 1.1.123.3 102 bro
ip pim sparse-mode
ip ospf network broadcast
ip ospf priority 0
r2:
============
inter s0
en frame
ip add 1.1.123.2 255.255.255.0
frame map ip 1.1.123.1 201 bro
frame map ip 1.1.123.3 203 bro
ip pim sparse-mode
ip ospf network broadcast
ip ospf priority 255
r3:
=============
inter e0
ip add 1.1.3.3 255.255.255.0
ip pim sparse-mode
inter s0
en frame
ip add 1.1.123.3 255.255.255.0
frame map ip 1.1.123.1 302 bro
frame map ip 1.1.123.2 302 bro
ip ospf network broadcast
ip ospf priority 0
ip pim sparse-mode
Can anybody help me?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3