From: kongck (kongck@xxxxxxxxxxxxxx)
Date: Fri Jun 02 2000 - 05:41:23 GMT-3
ip pim nbma-mode
----- Original Message -----
From: "abcd abcd" <abcd_efg_30001@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Friday, June 02, 2000 3:38 PM
Subject: Multicast on NBMA
> Hi, everyone, here is the problem.
> I have 3 routers in hub-and-spoke fr.
> r1,r3 is spoke, and r2 is hub, like that:
>
> -(e0)r1------vc------r2-----vc-----r3(e0)
> spoke hub spoke
>
> when i set r1 e0 join in multi-group 234.5.6.7, and r1
> should be rp in sparse-mode.
> the client is r3 e0 can't join the multi-group, and r3
> also can't ping the address 234.5.6.7.
>
> here is config:
> r1
> =============
> inter e0
> ip add 1.1.1.1 255.255.255.0
> ip igmp join 234.5.6.7
> ip pim sparse-mode
>
> inter s0
> en frame
> ip add 1.1.123.1 255.255.255.0
> frame map ip 1.1.123.2 102 bro
> frame map ip 1.1.123.3 102 bro
> ip pim sparse-mode
> ip ospf network broadcast
> ip ospf priority 0
>
> r2:
> ============
> inter s0
> en frame
> ip add 1.1.123.2 255.255.255.0
> frame map ip 1.1.123.1 201 bro
> frame map ip 1.1.123.3 203 bro
> ip pim sparse-mode
> ip ospf network broadcast
> ip ospf priority 255
>
> r3:
> =============
> inter e0
> ip add 1.1.3.3 255.255.255.0
> ip pim sparse-mode
>
> inter s0
> en frame
> ip add 1.1.123.3 255.255.255.0
> frame map ip 1.1.123.1 302 bro
> frame map ip 1.1.123.2 302 bro
> ip ospf network broadcast
> ip ospf priority 0
> ip pim sparse-mode
>
> Can anybody help me?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3