From: abcd abcd (abcd_efg_30001@xxxxxxxxx)
Date: Sat Jun 03 2000 - 21:57:39 GMT-3
I missed the config when pasting. :) but I set the
command: ip pim rp-add 1.1.1.1 in all three routers.
TIA
--- "Kevin M. Woods" <kev@nil.org> wrote:
> I don't see R1 defined as the RP for 234.5.6.7...
>
> Kevin
>
> // Hi, everyone, here is the problem.
> // I have 3 routers in hub-and-spoke fr.
> // r1,r3 is spoke, and r2 is hub, like that:
> //
> // -(e0)r1------vc------r2-----vc-----r3(e0)
> // spoke hub spoke
> //
> // when i set r1 e0 join in multi-group 234.5.6.7,
> and r1
> // should be rp in sparse-mode.
> // the client is r3 e0 can't join the multi-group,
> and r3
> // also can't ping the address 234.5.6.7.
> //
> // here is config:
> // r1
> // =============
> // inter e0
> // ip add 1.1.1.1 255.255.255.0
> // ip igmp join 234.5.6.7
> // ip pim sparse-mode
> //
> // inter s0
> // en frame
> // ip add 1.1.123.1 255.255.255.0
> // frame map ip 1.1.123.2 102 bro
> // frame map ip 1.1.123.3 102 bro
> // ip pim sparse-mode
> // ip ospf network broadcast
> // ip ospf priority 0
> //
> // r2:
> // ============
> // inter s0
> // en frame
> // ip add 1.1.123.2 255.255.255.0
> // frame map ip 1.1.123.1 201 bro
> // frame map ip 1.1.123.3 203 bro
> // ip pim sparse-mode
> // ip ospf network broadcast
> // ip ospf priority 255
> //
> // r3:
> // =============
> // inter e0
> // ip add 1.1.3.3 255.255.255.0
> // ip pim sparse-mode
> //
> // inter s0
> // en frame
> // ip add 1.1.123.3 255.255.255.0
> // frame map ip 1.1.123.1 302 bro
> // frame map ip 1.1.123.2 302 bro
> // ip ospf network broadcast
> // ip ospf priority 0
> // ip pim sparse-mode
> //
> // Can anybody help me?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:40 GMT-3