From: ciscosystems (ciscosystems@xxxxxxxx)
Date: Fri May 26 2000 - 23:49:40 GMT-3
Hello everyone,
I am lurking in this list, recently hear many people attack
someone who asked one question about real lab test, I almost
agree these criticism, but i want to declare, these guys must
preserve their moral integrity, i don't want to bring up dead
horse, but i'm so sorry for Ryan (CCIE#5847???), you really don't
have right to comment others, give some evidence:
May 25,2000 Ryan wrote:
Gee, where did you get all these questions? I must be psychic, because I
just happen to know the answer to every question you've asked and most
likely every question you're going to ask.
Please, nobody help this guy... Let him figure this stuff out on his own.
I'm not just being a jerk here... I'm sure you know what I'm getting at...
Ryan, CCIE #5847
----- Original Message -----
From: "Yong" <yanyong@ihw.com.cn>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 24, 2000 11:04 AM
Subject: OSPF neighbor
> i have three router on ethernet segment runing OSPF and well,I not hope
establish neighbor when other router attach the segment, not use ospf
authenticate.
> can i hoe to configure ?
> Thanks
>
> best regards
> Yong
BUT, see this:
April 25, Ryan wrote, subject: sanity check...
If I wanted to filter out 0x0004, 0x0008 & 0x000c LSAP's would "0x000c
0xfff3" cover all three? Next, what is a "test frame" as it applies to SNA?
How would I filter that?
Thanks,
Ryan
the above question is one real lab question, somebody should know it,
Ryan asked this question on the day before going to San Joes for his
first try, in that try , Ryan got his number, Ryan is pure? i don't
believe he could get the number on his first try without knowing the
total lab question, include the troubleshooting!!!
I do not want to displease someone, but i wish someone criticize
others who should stand up!!!
Best regards,
ciscosystems mailto:ciscosystems@sina.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:31 GMT-3