From: John (veryconnected@xxxxxxxxx)
Date: Thu May 18 2000 - 12:23:43 GMT-3
A router will not announce the route (s) unless
they are in its route table.
--- Kevin Young <kvyoung@sina.com> wrote:
> Hi, everyone, i encounter a problem and couldn't
> understand.
>
> i want to summarize some address which are not
> connecting to router's interfaces,here is
> configuration and route table:
>
> interface Ethernet0
> ip address 137.20.50.7 255.255.255.0
> ip summary-address eigrp 10 200.100.0.0 255.252.0.0
> ip summary-address eigrp 10 16.0.0.0 240.0.0.0
> ip summary-address eigrp 10 160.160.0.0 255.240.0.0
> ip summary-address eigrp 10 8.0.0.0 248.0.0.0
> ip summary-address eigrp 10 160.0.0.0 240.0.0.0
>
> router eigrp 10
> network 137.20.0.0
>
> these summarized address are not connectting to
> interfaces, this is route table:
>
> 137.20.0.0/16 is variably subnetted,
> C 137.20.50.0/24 is directly connected,
> Ethernet0
> D 8.0.0.0/5 is a summary, 00:07:44, Null0
> D 160.0.0.0/4 is a summary, 00:07:23, Null0
>
> the question is why only two addresses are
> summarized. but 16.0.0.0 and 200.100.0.0 are not
> summarized, is there some tips?
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3