From: Kevin Young (kvyoung@xxxxxxxx)
Date: Fri May 19 2000 - 05:42:21 GMT-3
thanks for all reply, i tried it more times, the summarized routes wouldn't be
announced unless it ot it's subnets joined in eigrp or learned from eigrp.
----- Original Message -----
From: John <veryconnected@yahoo.com>
To: Kevin Young <kvyoung@sina.com>; ccielab <ccielab@groupstudy.com>
Sent: Thursday, May 18, 2000 11:23 PM
Subject: Re: eigrp summary address
>
> A router will not announce the route (s) unless
> they are in its route table.
>
>
> --- Kevin Young <kvyoung@sina.com> wrote:
> > Hi, everyone, i encounter a problem and couldn't
> > understand.
> >
> > i want to summarize some address which are not
> > connecting to router's interfaces,here is
> > configuration and route table:
> >
> > interface Ethernet0
> > ip address 137.20.50.7 255.255.255.0
> > ip summary-address eigrp 10 200.100.0.0 255.252.0.0
> > ip summary-address eigrp 10 16.0.0.0 240.0.0.0
> > ip summary-address eigrp 10 160.160.0.0 255.240.0.0
> > ip summary-address eigrp 10 8.0.0.0 248.0.0.0
> > ip summary-address eigrp 10 160.0.0.0 240.0.0.0
> >
> > router eigrp 10
> > network 137.20.0.0
> >
> > these summarized address are not connectting to
> > interfaces, this is route table:
> >
> > 137.20.0.0/16 is variably subnetted,
> > C 137.20.50.0/24 is directly connected,
> > Ethernet0
> > D 8.0.0.0/5 is a summary, 00:07:44, Null0
> > D 160.0.0.0/4 is a summary, 00:07:23, Null0
> >
> > the question is why only two addresses are
> > summarized. but 16.0.0.0 and 200.100.0.0 are not
> > summarized, is there some tips?
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:30 GMT-3