From: stiff (stiff.yu@xxxxxxxxxxxxxxxxxx)
Date: Fri May 12 2000 - 06:30:23 GMT-3
Hi,Kai welsch,
I think you are right in normal telnet,
But when I use reverse telnet I type 'EXIT',
I can't return.Thank you for reply.
regard.
-----Original Message-----
From: Kai_Welsch@neef.de <Kai_Welsch@neef.de>
To: stiff <stiff.yu@datacraft-asia.com>; ccielab@groupstudy.com
<ccielab@groupstudy.com>
Date: 2000Äê5ÔÂ11ÈÕ 19:07
Subject: Antwort: telenet question
>
>
>
>Hi
>
>When you use Ctrl+Shift+6+x on r1 then you disconnect the session to r2.
>In that case you can´t reach r3 or r2
>When you are connected via telnet to r2 and then via telnet to r3 type only
>"exit" at r3 and you only disconnect the telnet session to r3.
>Thats the way
>
>regards
>Mit freundlichen Grüßen
>
>Kai Welsch / wk , GS KA Systemengineer
>NEEF-Elektrotechnik GmbH & Co
>Systemhaus für Gebäude- und Kommunikationstechnik
>Unternehmen der Sulzer Infra
>Windeckstrasse 9 76135 Karlsruhe
>Tel: +49 721/8606-238
>Fax: +49 721/8606-232
>E-Mail/Internet: Kai_Welsch@neef.de
>Notes: Kai Welsch/Infra CS @SULZERINFRA
>Website: http://www.neef.de/
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:29 GMT-3