Antwort: telenet question

From: Kai_Welsch@xxxxxxx
Date: Thu May 11 2000 - 07:53:59 GMT-3

• Next message: cpchang: "Question on PRI."
• Previous message: Erick: "Re: Can i config dhcp fuction on a router?"
• Next in thread: stiff: "Re: Antwort: telenet question"
• Maybe reply: stiff: "Re: Antwort: telenet question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi

When you use Ctrl+Shift+6+x on r1 then you disconnect the session to r2.
In that case you can´t reach r3 or r2
When you are connected via telnet to r2 and then via telnet to r3 type only
"exit" at r3 and you only disconnect the telnet session to r3.
Thats the way

regards
Mit freundlichen Grüßen

Kai Welsch / wk , GS KA Systemengineer
NEEF-Elektrotechnik GmbH & Co
Systemhaus für Gebäude- und Kommunikationstechnik
Unternehmen der Sulzer Infra
Windeckstrasse 9 76135 Karlsruhe
Tel: +49 721/8606-238
Fax: +49 721/8606-232
E-Mail/Internet: Kai_Welsch@neef.de
Notes: Kai Welsch/Infra CS @SULZERINFRA
Website: http://www.neef.de/

• Next message: cpchang: "Question on PRI."
• Previous message: Erick: "Re: Can i config dhcp fuction on a router?"
• Next in thread: stiff: "Re: Antwort: telenet question"
• Maybe reply: stiff: "Re: Antwort: telenet question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:28 GMT-3