From: Kevin Young (kvyoung@xxxxxxxx)
Date: Thu May 11 2000 - 01:07:33 GMT-3
try to change the r1 and r2's ethernet interfaces' priority to zero.
ip ospf pri 0
**************************************
Kevin Young
Senior Network Engineer
Yinxi Electronic Information Co.,Ltd
(86)-10-82625798 x 810
**************************************
----- Original Message -----
From: wang xihan
To: kongck ; ccielab@groupstudy.com
Sent: Thursday, May 11, 2000 10:49 AM
Subject: ospf challenge
Hi all
Thank you for the reply , i think i get it.
Here is another quesion.
In a ethernet ospf area , There are three router connect to each other(r1,r
2,r3), For security reasons, I would like r3 to be the DR, and all router will
adjacent to R3 and will not make adjacent to others, That means when i show ip
ospf nei in other routers, only r3 can see r1 and r2, in either r1 and r2 , the
y can only see r3. There should be some thing can do it.Can sb tell me how?
Thanks a lot
xihan wang
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:28 GMT-3